For over 30 years, QSC has been bringing out the magic in cinema sound. We’ve built a reputation for unmatched quality, performance, and reliability as the only major manufacturer of complete cinema solutions. With processing, amplification, and loudspeakers integrated into a seamless whole, QSC is the complete solution for all your cinema sound needs.
QSC DCM300
DCM Series crossover/monitors are a powerful solution for today's D-Cinema audio systems for installations that use a separate cinema processor such as QSC USL JSD Series processors. The new DCM builds on the legacy of QSC's DCP and DPM products to provide loudspeaker crossover and monitoring functions for Digital Cinema in a Single integrated system. Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC's Digital Cinema Speakers (DCS), the DCM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCM 300 is configurable for tri- or quad-amp operation for three screen channels. The DCM 300 accommodates 2 or 4 surround channels (5.1 or 7.1)
​
When used with QSC DCS Series cinema loudspeakers, QSC's proprietary Intrinsic Correction adjusts for the intrinsic behaviours of loudspeakers, removing any anomalies from the equation factors that affect measured response and, ultimately, the quality of sound. The result is optimal "out of the box" performance while minimizing on-site room tuning.
Features
-
Analogue inputs accept audio from cinema processors or other 8-channel analogue audio sources
-
QSC Intrinsic Correction DSP Settings for optimal performance of QSC cinema speakers
-
Booth monitor with front panel control for easy operation
-
Passive, bi-, tri- or quad-amp
-
Compatible with all existing QSC DCA amplifiers
-
Bypass mode - routes audio around failed components to ensure that the show will go on
-
Control and monitoring via Ethernet including full SNMP support
-
Continued development of software and firmware will add new capabilities via easy updates
QSC DPM300
The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DPM 300 is configurable for passive, bi-amp, tri-amp and quad-amp operation and 2 or 4 surround channels (5.1 or 7.1).
Features
-
Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
-
HDMI input/output for non-sync sources (DPM 300H)
-
Dolby Digital Plus™ and DTS-HD® (DPM 300H)
-
Control and monitoring via Ethernet including full SNMP support
-
Serial automation control via RS-232
-
Analog Inputs for film processors, non-sync and Mic/Line
-
Master volume and full 1/3 Octave Graphic EQ on all channels (except subwoofer)
-
Booth Monitor loudspeaker and headphone jack
-
Digital Loudspeaker Crossovers — three passive bi-, tri-, or quad-amp screen channels
-
Compatible with all existing DCA amplifiers — thousands of DCA-equipped screens are ready for full network monitoring and control
-
Bypass mode routes audio around failed components to insure that the show will go on
-
Intrinsic Correction™ for DCS loudspeakers for optimal “out of box” performance and reduced set-up time
-
Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
Core Nano
The Q-SYS Core Nano audio, video and control (AV&C) processor extends the applications of the Q-SYS Platform into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technologies and driven by the same Q-SYS OS as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core Nano is designed for applications with lower network channel capacity and/or targeted processing requirements.
Features
-
64 x 64 networked audio channels (Q-LAN / AES67)
-
8x AEC processors
-
up to 32 x 32 Dante audio channels (8 x 8 included)
-
USB AV bridging (8 x 8 audio + Q-SYS camera support)
-
Full-featured Q-SYS Control engine (with optional feature license)
-
External USB audio device host
-
Up to 2x VoIP instances
-
1U half-width, includes mounting hardware
Core 8 Flex
The Core 8 Flex audio, video and control (AV&C) processor extends the applications of the Q-SYS Platform into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technologies and driven by the same Q-SYS OS as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core 8 Flex is designed for applications with lower network or analog channel capacity and/or targeted processing requirements.
Features
-
64 x 64 networked audio channels (Q-LAN / AES67)
-
8x on-board Flex channels and GPIO
-
8x AEC processors
-
up to 32 x 32 Dante audio channels (8 x 8 included)
-
USB AV bridging (8 x 8 audio + Q-SYS camera support)
-
Full-featured Q-SYS Control engine (with optional feature license)
-
External USB audio device host
-
Up to 2x VoIP instances
-
1U half-width, includes mounting hardware
Core 110F
The Q-SYS™ Core 110f v2 processor provides a fully integrated audio, video and control solution for installations with a mixture of analog and network channels, supporting medium-sized rooms through the largest Enterprise scale deployments.
Features
-
128 networked audio channels (Q-LAN / AES67)
-
24 channels of analog I/O, including 8 configurable Flex channels
-
16x AEC processors
-
Up to 32 x 32 Dante audio channels (8 x 8 included)
-
USB AV bridging (16 x 16 audio + Q-SYS camera support)
-
Full-featured Q-SYS Control engine (with optional feature license)
-
External USB audio device host
-
Up to 4x VoIP instances
Core 510i
The Q-SYS™ Core 510i processor is an audio, video and control processing system that leverages Intel™ CPUs and motherboards as well as a dedicated, Linux™ real-time operating system developed by Q-SYS to provide class-leading capabilities for AV systems of any scale.
The Q-SYS Core 510i processor offers the most flexible audio I/O of any Q-SYS Core, perfect for applications that require a diversity of analogue, digital and networked audio connectivity. It features eight onboard I/O card slots that can be populated with any combination of Q-SYS Type-II I/O cards allowing diverse connectivity options.
Features
-
256 x 256 networked audio channels (Q-LAN / AES67)
-
Configurable onboard I/O via 8 open Q-SYS IO Cards slots
-
64 x AEC processors
-
up to 128 x 128 Dante audio channels (8 x 8 included)
-
Full-featured Q-SYS Control engine (with optional feature license)
-
16 x 16 GPIO
Core 610
The Q-SYS Core 610 represents the next-generation of Q-SYS processing, pairing the Q-SYS OS with enterprise-grade Dell COTS server hardware to deliver a flexible and scalable audio, video and control solution for a vast range of larger scale applications. It is a fully networked AV&C processor, letting you distribute network I/O where it’s most convenient. The Core 610 is equally suited for centralized processing for multiple meeting rooms in enterprise applications, as well as handling larger spaces or venues in hospitality, entertainment, or transit hubs.
Features
-
256 x 256 networked audio channels (Q-LAN/AES67)
-
64x AEC processors
-
up to 128 x 128 Dante audio channels (8 x 8 included); 256 x 256 license tier coming soon with the release of Q-SYS Designer Software v9.8
-
Supports up to 16x Q-SYS NM-T1 network microphones
-
64x VoIP softphone instances
-
64 x 64 Media/WAN streaming capacity
-
16x multitrack playback channels (up to 128 with optional feature license)
-
4x multitrack record channels
-
Dual gigabit Ethernet ports for redundant networked audio
-
Two (2) independent, gigabit auxiliary Ethernet ports for segregation of network services such as VoIP, SNMP, LLDP, LDAP and WAN Media streaming
-
Onboard 480 GB media drive
-
iDRAC monitoring for integration with IT monitoring systems
-
1RU form factor
DCIO
DCIO is a cinema-specific interface that serves as the audio I/O for each screen in a Q-SYS™ enabled cinema complex. The DCIO – along with Q-SYS Cores, DPA-Q amplifiers and DCS loudspeakers – provides a cost-effective way to realize the full benefits of a Q-SYS enabled cinema for every room in a multiplex, by delivering a full-system approach to cinema audio design driven by the Q-SYS OS. Using Q-SYS Designer and custom UCIs, touchpanels, and mobile apps, the user can configure, control, and monitor their theatre audio equipment through a seamless system view.
Features
-
Digital Cinema Inputs/Outputs for Q-SYS™ enabled cinemas and cinema complexes
-
Routes inputs/outputs from projector IMB and alternate content sources to Q-SYS Core over Q-LAN, network distribution technology by Q-SYS
-
Mic/line input
-
Line level monitor output
-
Powered monitor output to passive speaker
-
HDMI input/output for non-sync sources (DCIO-H version only)
-
Dolby Audio™ (featuring Dolby Digital Plus™ and Dolby® Surround 7.1) and DTS-HD® decoding (DCIO-H version only)
-
Four relay control outputs
-
HI / VI outputs
-
Automation inputs include RS-232 and GPI